![Foil stencil [Digital]](https://t-blade.shop/wp-content/uploads/2025/10/2043-folienschablone-300-150x150.jpg)
Runner black
23,00 € Couple
| Quantity | Price | Discount |
|---|---|---|
| 1 | 23,00 € Couple | 0,00 € |
| 2 | 22,00 € Couple | 1,00 € |
| 3 | 21,00 € Couple | 2,00 € |
| 4+ | 20,00 € Couple | 3,00 € |
Replacement blades for the t-blade system in black. After wear of the RunnerSimply swap them – that makes sharpening ice skates unnecessary.
To change the Runner A system key is required; both versions (metal screw or plastic screw) can be found in our online shop.
CHARACTERISTICS
The Runner It incorporates almost all the key technology of the t-blade runner system. It consists of a 1mm thick metal tread that is injected into a cold-impact-resistant fiberglass-reinforced plastic.
Due to the low metal mass, the Runner Besides its minimal weight, it boasts excellent thermal properties which, in conjunction with the highly polished running surface, lead to an improvement in sliding properties of up to 40%. After wear of the RunnerIts design as an interchangeable blade allows for easy and quick replacement.
ADVANTAGES
Very easy
Small curve radii
Excellent maneuverability
Excellent sliding properties
Up to 4 times longer usage time
Extreme edge hardness (approx. 54 HRC = 570 HV)
Constant sliding surface length / rocker shape
High cornering speed
Faster Runner-change
Edge grinding is not required
shatterproof
VARIANTS
The t-blade-Runner It is available in 18 variants. These result from combining the 3 sliding surface lengths [SML] with the 6 hollow radii [9-11-13-15-18-21]. The respective RunnerThe variant (e.g., S-9-280) is characterized by:
Sliding surface length (S)
Hollow radius (9)
System size (280mm)
A short sliding surface length [S] offers better mobility, while a long one [L] provides more stability. Deep hollow radii [9,11] result in higher edge retention, and shallow radii [15,18] provide better sliding properties.
Packaging unit: 1 pair
English
Characteristics
The runner almost contains the entire key technology of the t-blade blade system. It consists of a 1mm thick metal strip which is molded
into a cold impact resistant glass fiber plastic. Due to the low metal mass, the runner has extraordinary thermal characteristics – apart
from its minimal weight. In combination with the highly polished running surface, this leads to an improvement of up to 40% of the sliding
characteristics. After the runner has been worn down, it can be exchanged quickly and easily.
Advantages
-Very light
-Small curve radii.
-Extraordinary maneuverability
-Excellent sliding characteristics.
-Up to 4-times longer duration
-Extreme edge hardness (approx. 55 HRC = 570 HV)
-Constant sliding surface length/Rocker shape
-High cornering speed
-Fast runner exchange
-Sharpening of the edges is not necessary
-Shatter-proof
V
The t-blade runner is available in 18 variants. These result from the combination of three sliding surface lengths [SML] with the six
radiuses of hollow [9-11-13-15-18-21]. The corresponding runner variant (eg S-9-280) is characterized by:
-Sliding surface length (S),
-Radius of hollow (9),
-System size (280mm)
A short contact area [S] provides better maneuverability, a long one [L] more stability. By means of deeper radiuses of hollow [9,11],
a better edge hold is achieved, whereas a better sliding ability is achieved by flat radiuses [15,18]. The runner M-13 in white is the
standard variant for our blade system.
Lindauer Str. 1a
86842 TürkheimResponsible person: support@t-blade.shopWarnings and safety information:
Warnings & Safety Information
T-Blade The products are sporting goods for use in ice hockey, figure skating and similar sports.
Ice sports. Use is entirely at your own risk.
- Risk of injury: runners, Runner And interchangeable blades are sharp. In case of improper use
Handling poses a risk of cuts and injuries. - Assembly & Replacement: The exchange of Runnern, stubbies or other system components
Installation must be carried out only according to the manufacturer's instructions. Improper installation can lead to material failure and loss of control.
or lead to injuries. - Regular controll: Before each use, all fasteners, screws and system parts must be checked.
to check for secure fit, wear and damage. - Wear parts: Runner and replaceable blades are subject to natural wear and tear and must be replaced when necessary.
Wear and tear should be replaced in a timely manner. - Protective gear: Wearing appropriate protective equipment (e.g. helmet, pads) is strongly recommended.
empfohlen. - Not for children without supervision: Use by children should only be under supervision and
Instructions will follow. - Not a toy: T-Blade These products are not toys and are not intended for improper use.
Intended use.
The manufacturer and distributor accept no liability for damages or injuries caused by improper use.
These problems can arise from improper use, incorrect assembly, or lack of maintenance.
t-blade Holder-Size finder: Shoe size → t-blade system size
For ordering the t-blade Holders It's not the shoe model that's crucial, but the right one.
t-blade system size (HolderLength). Find your brand and size in the table and order the specified system size.
The information CM is just a check: it corresponds to the Foot length in centimeters.
Important: FARMER and CCM have here the identical Assignment. GRAF uses its own mapping.
BAUER & CCM – Assignment to t-blade system size
| Bauer / CCM Size | Shoe sizes | t-blade system size | |||
|---|---|---|---|---|---|
| US | EU | UK | cm (foot length) | ||
| 5 | 6 | 38,5 | 5,5 | 24,3 | 248 |
| 5,5 | 6,5 | 39 | 6 | 24,7 | 248 |
| 6 | 7,5 | 40,5 | 6,5 | 25,1 | 248 |
| 6,5 | 8 | 41 | 7 | 25,5 | 256 |
| 7 | 8,5 | 42 | 7,5 | 26 | 256 |
| 7,5 | 9 | 42,5 | 8 | 26,4 | 264 |
| 8 | 9,5 | 43 | 8,5 | 26,8 | 264 |
| 8,5 | 10 | 44 | 9 | 27,2 | 272 |
| 9 | 10,5 | 44,5 | 9,5 | 27,7 | 272 |
| 9,5 | 11 | 45 | 10 | 28,1 | 280 |
| 10 | 11,5 | 45,5 | 10,5 | 28,5 | 280 |
| 10,5 | 12 | 46 | 11 | 28,9 | 288 |
| 11 | 12,5 | 47 | 11,5 | 29,4 | 288 |
| 11,5 | 13 | 47,5 | 12 | 29,8 | 300 |
| 12 | 13,5 | 48 | 12,5 | 30,2 | 300 |
GRAF – Assignment to t-blade system size
| Shoe sizes | t-blade system size | |||
|---|---|---|---|---|
| US | EU | UK | cm (foot length) | |
| 5,5 | 37 1/3 | 4,5 | 23,5 | 248 |
| 6 | 38 | 5 | 24 | 248 |
| 6,5 | 38 2/3 | 5,5 | 24,5 | 248 |
| 7 | 39 1/3 | 6 | 25 | 248 |
| 7,5 | 40 | 6,5 | 25,3 | 256 |
| 8 | 40 2/3 | 7 | 25,7 | 256 |
| 8,5 | 41 1/3 | 7,5 | 26 | 264 |
| 9 | 42 | 8 | 26,5 | 264 |
| 9,5 | 42 2/3 | 8,5 | 27 | 272 |
| 10 | 43 1/3 | 9 | 27,5 | 272 |
| 10,5 | 44 | 9,5 | 28 | 280 |
| 11 | 44 2/3 | 10 | 28,3 | 288 |
| 11,5 | 45 1/3 | 10,5 | 28,5 | 288 |
| 12 | 46 | 11 | 29 | 288 |
| 12,5 | 46 2/3 | 11,5 | 29,5 | 300 |
| 13 | 47 1/3 | 12 | 30,0 | 300 |
BAUER & CCM – Assignment to t-blade system size
GRAF – Assignment to t-blade system size
Discover More
Reviews
Clear FiltersThere are no reviews yet.