![Stabilisator with stainless steel screw connection, light red [Digital] – Image 1](https://t-blade.shop/wp-content/uploads/2025/10/2128-stabilisator-lackiert-rotrjrq0v3d7gnhm-scaled.jpg)
Stabilisator with stainless steel screw fitting, bright red
Maximum stability and precise power transmission for your t-blade setup
The t-blade Stabilisatorwith stainless steel screw fitting in light red are designed for anyone who wants to build an uncompromisingly stable, precise, and durable setup. They combine Runner and Holder form-fitting, play-free and torsionally rigid and ensure controlled power transmission – even under high lateral and longitudinal loads.
The bright red version adds a sporty, eye-catching accent and brings dynamism to the t-blade setup – ideal for anyone who wants to make a clear statement on the ice, not only technically but also visually. Suitable for use in hockey, Freestyle, leisure area just like ambitious amateur runners.
Construction & Material
The Stabilisator consists glass fiber reinforced, cold impact resistant special plastic and owns identical material properties to the t-blade Holder.
The integrated Stainless steel screw fitting is designed for high continuous stress, frequent use RunnerDesigned for changeovers and maximum operational reliability.
Compared to the plastic screw connection, the stainless steel version offers:
- higher long-term stability
- even better shape stability under load
- Maximum safety during intensive use
Stainless steel screw connection – secure & play-free
The screw connection consists of high-quality stainless steel screws, lock washers and Locknuts with large pressing surfacesThis design makes it possible to:
- backlash-free, form-fitting connection between Runner and Holder
- Gentle force distribution for plastics thanks to large contact area
- Fail-safe fixing through locking lugs and securing elements
- High long-term stability even with frequent use. Runner-change
The recommended Tightening torque of max. 1,2 Nm Ensures optimal stability without overloading the material.
Driving dynamics & system stability
The tight screw connection stiffens the Stabilisator the t-blade skid system specifically in transverse and longitudinal directions.
The result on the ice:
- more precise edge guidance
- smoother running behavior at high speeds
- More control during acceleration and changes of direction
- reduced micro-movements between Runner and Holder
A clearly noticeable advantage – especially with a dynamic driving style.
Applications
The Stabilisator With stainless steel screw fittings, it is ideal for:
- hockey player
- freestyler
- ambitious recreational runners
- t-blade riders with a focus on stability & durability
Also perfect as Purchase, replacement or Upgrade of Stabilisatorwith plastic screw connection.
Note regarding system length
The needed System length (e.g. 248, 256, 272 mm) is not on the Stabilisator or Holder printed.
It is located on the Back of the Runners.
Is no Runner More is available, the appropriate system length can be determined via the Shoe size chart in the corresponding tab be determined.
Advantages at a glance
- Stainless steel screw connection for maximum stability
- No games Runner-Fixation
- Plastic-friendly, large-area screw connection
- Fail-safe locking and securing elements
- High system stiffness in the transverse and longitudinal axes
- Ideal for replacement, exchange & upgrade
- Compatible with all t-blade system components
Image note
- System length 248 mm: 4 stakes, 5 screw points
- From a system length of 256 mm: 5 stakes, 6 screw points
Images are for illustrative purposes only and may vary depending on the system length.
Lindauer Str. 1a
86842 TürkheimResponsible person: support@t-blade.shopWarnings and safety information:
Warnings & Safety Information
T-Blade The products are sporting goods for use in ice hockey, figure skating and similar sports.
Ice sports. Use is entirely at your own risk.
-
Risk of injury: runners, Runner And interchangeable blades are sharp. In case of improper use
Handling poses a risk of cuts and injuries. -
Assembly & Replacement: The exchange of Runnern, stubbies or other system components
Installation must be carried out only according to the manufacturer's instructions. Improper installation can lead to material failure and loss of control.
or lead to injuries. -
Regular controll: Before each use, all fasteners, screws and system parts must be checked.
to check for secure fit, wear and damage. -
Wear parts: Runner and replaceable blades are subject to natural wear and tear and must be replaced when necessary.
Wear and tear should be replaced in a timely manner. -
Protective gear: Wearing appropriate protective equipment (e.g. helmet, pads) is strongly recommended.
empfohlen. -
Not for children without supervision: Use by children should only be under supervision and
Instructions will follow. -
Not a toy: T-Blade These products are not toys and are not intended for improper use.
Intended use.
The manufacturer and distributor accept no liability for damages or injuries caused by improper use.
These problems can arise from improper use, incorrect assembly, or lack of maintenance.
t-blade Holder-Size finder: Shoe size → t-blade system size
For ordering the t-blade Holders It's not the shoe model that's crucial, but the right one.
t-blade system size (HolderLength). Find your brand and size in the table and order the specified system size.
The information CM is just a check: it corresponds to the Foot length in centimeters.
Important: FARMER and CCM have here the identical Assignment. GRAF uses its own mapping.
BAUER & CCM – Assignment to t-blade system size
| Bauer / CCM Size | Shoe sizes | t-blade system size | |||
|---|---|---|---|---|---|
| US | EU | UK | cm (foot length) | ||
| 5 | 6 | 38,5 | 5,5 | 24,3 | 248 |
| 5,5 | 6,5 | 39 | 6 | 24,7 | 248 |
| 6 | 7,5 | 40,5 | 6,5 | 25,1 | 248 |
| 6,5 | 8 | 41 | 7 | 25,5 | 256 |
| 7 | 8,5 | 42 | 7,5 | 26 | 256 |
| 7,5 | 9 | 42,5 | 8 | 26,4 | 264 |
| 8 | 9,5 | 43 | 8,5 | 26,8 | 264 |
| 8,5 | 10 | 44 | 9 | 27,2 | 272 |
| 9 | 10,5 | 44,5 | 9,5 | 27,7 | 272 |
| 9,5 | 11 | 45 | 10 | 28,1 | 280 |
| 10 | 11,5 | 45,5 | 10,5 | 28,5 | 280 |
| 10,5 | 12 | 46 | 11 | 28,9 | 288 |
| 11 | 12,5 | 47 | 11,5 | 29,4 | 288 |
| 11,5 | 13 | 47,5 | 12 | 29,8 | 300 |
| 12 | 13,5 | 48 | 12,5 | 30,2 | 300 |
GRAF – Assignment to t-blade system size
| Shoe sizes | t-blade system size | |||
|---|---|---|---|---|
| US | EU | UK | cm (foot length) | |
| 5,5 | 37 1/3 | 4,5 | 23,5 | 248 |
| 6 | 38 | 5 | 24 | 248 |
| 6,5 | 38 2/3 | 5,5 | 24,5 | 248 |
| 7 | 39 1/3 | 6 | 25 | 248 |
| 7,5 | 40 | 6,5 | 25,3 | 256 |
| 8 | 40 2/3 | 7 | 25,7 | 256 |
| 8,5 | 41 1/3 | 7,5 | 26 | 264 |
| 9 | 42 | 8 | 26,5 | 264 |
| 9,5 | 42 2/3 | 8,5 | 27 | 272 |
| 10 | 43 1/3 | 9 | 27,5 | 272 |
| 10,5 | 44 | 9,5 | 28 | 280 |
| 11 | 44 2/3 | 10 | 28,3 | 288 |
| 11,5 | 45 1/3 | 10,5 | 28,5 | 288 |
| 12 | 46 | 11 | 29 | 288 |
| 12,5 | 46 2/3 | 11,5 | 29,5 | 300 |
| 13 | 47 1/3 | 12 | 30,0 | 300 |
BAUER & CCM – Assignment to t-blade system size
GRAF – Assignment to t-blade system size
All color variations of the t-blade Stabilisatoren differ according to Screw connection (plastic or stainless steel) and color.
The article number will help you with quick identification and support.
Discover More
Stabilisator with stainless steel screw fitting, blue
36,99 € Couple
Stabilisator with stainless steel screw connection, yellow
36,99 €
Stabilisator with stainless steel screw connection, metallic blue
49,99 €
Stabilisator with stainless steel screw fittings, metallic chrome
50,00 €
Stabilisator with stainless steel screw connection, metallic gold
49,99 €
Stabilisator with stainless steel screw connection, metallic red
50,00 €
Stabilisator with stainless steel screw fitting, black
38,00 € Couple
Stabilisator with plastic screw connection, metallic chrome
49,99 €
Reviews
Clear FiltersThere are no reviews yet.