Stabilisator with stainless steel screw fitting, black
38,00 € Couple
t-blade Stabilisatorwith stainless steel screw connections – maximum stability & precise power transmission
The t-blade Stabilisatorin black with stainless steel screws are a key safety element of the t-blade ski system. They connect Runner and Holder form-fitting together and ensure high torsional stiffness, backlash-free fit and controlled power transmission – even under high lateral and longitudinal loads in ice hockey, leisure or freestyle use.
Made of glass fiber reinforced, cold impact resistant special plastic have these Stabilisatoren with identical material properties as the t-blade Holder. The integrated one Stainless steel screw fitting is specifically designed for durable, secure and repeated installation.
Construction & Screwing
The stainless steel screw fitting consists of high-quality screws, locking washers and locking nuts with large pressing surfaces. This design enables:
- a message backlash-free, form-fitting connection between Runner and Holder
- Plastic-friendly force distribution through large-scale distribution
- height Long term stability even with frequent Runner-change
- fail-safe fixing through Locking lugs and locking washers
The recommended Tightening torque of max. 1,2 Nm Ensures optimal stability without material overload.
Driving dynamics & system stability
The tight screw connections stiffen the Stabilisatorand the skid system specifically in Longitudinal and transverse directions. The result:
- more precise edge guidance
- smoother running behavior at high speeds
- More control in corners and when accelerating.
- reduced micro-movements between Runner and Holder
Especially for Ice hockey players, ambitious recreational runners and freestylers The stainless steel screw connection offers a noticeable increase in stability and safety.
Replacement, exchange & upgrade
The t-blade StabilisatorFittings with stainless steel screw connections are ideal as:
- Replacement in case of damage or wear
- Upgrade from plastic to stainless steel screw fittings
- Visual individualization through color change
All variants are fully compatible with the existing t-blade skid system.
Note regarding system length:
The required system length (e.g. 248, 256, 272 mm) is not on the Stabilisator or Holder printed.
It is located on the Back of the Runners.
Is no Runner More is available, the appropriate system length can be determined via the Shoe size chart in the tab be determined.
Design & color variations
The Stabilisatoren are in numerous Solid and metallic colors available and allow for individual visual design of the skid system.
You can find the color overview with direct links to all variants in the corresponding tab on the product page.
Advantages at a glance
- Very high System stiffness through stainless steel screw connection
- No games Runner-fastening
- Plastic-friendly, large-area screw connection
- Fail-safe locking and securing elements
- Ideal for Replacement, exchange & upgrade
- Compatible with all t-blade system components
Image note:
Stabilisatoren with System length 248 mm have 4 stakes and 5 screw points.
Ab System length 256 mm have them Stabilisatoren about 5 stakes and 6 screw points.
| Compatibility | all t-blade Holder |
|---|---|
| Tightening torque | max. 1,2 Nm |
| Mounting | Screw mounting |
| field of application. | Ice hockey, freestyle, recreational, amateur |
| Color | Black |
| Material | fiberglass reinforced plastic |
| Gland | Stainless Steel |
| System | t-blade system component |
| Product type | Stabilisator |
Lindauer Str. 1a
86842 TürkheimResponsible person: support@t-blade.shopWarnings and safety information:
Warnings & Safety Information
T-Blade The products are sporting goods for use in ice hockey, figure skating and similar sports.
Ice sports. Use is entirely at your own risk.
- Risk of injury: runners, Runner And interchangeable blades are sharp. In case of improper use
Handling poses a risk of cuts and injuries. - Assembly & Replacement: The exchange of Runnern, stubbies or other system components
Installation must be carried out only according to the manufacturer's instructions. Improper installation can lead to material failure and loss of control.
or lead to injuries. - Regular controll: Before each use, all fasteners, screws and system parts must be checked.
to check for secure fit, wear and damage. - Wear parts: Runner and replaceable blades are subject to natural wear and tear and must be replaced when necessary.
Wear and tear should be replaced in a timely manner. - Protective gear: Wearing appropriate protective equipment (e.g. helmet, pads) is strongly recommended.
empfohlen. - Not for children without supervision: Use by children should only be under supervision and
Instructions will follow. - Not a toy: T-Blade These products are not toys and are not intended for improper use.
Intended use.
The manufacturer and distributor accept no liability for damages or injuries caused by improper use.
These problems can arise from improper use, incorrect assembly, or lack of maintenance.
t-blade Holder-Size finder: Shoe size → t-blade system size
For ordering the t-blade Holders It's not the shoe model that's crucial, but the right one.
t-blade system size (HolderLength). Find your brand and size in the table and order the specified system size.
The information CM is just a check: it corresponds to the Foot length in centimeters.
Important: FARMER and CCM have here the identical Assignment. GRAF uses its own mapping.
BAUER & CCM – Assignment to t-blade system size
| Bauer / CCM Size | Shoe sizes | t-blade system size | |||
|---|---|---|---|---|---|
| US | EU | UK | cm (foot length) | ||
| 5 | 6 | 38,5 | 5,5 | 24,3 | 248 |
| 5,5 | 6,5 | 39 | 6 | 24,7 | 248 |
| 6 | 7,5 | 40,5 | 6,5 | 25,1 | 248 |
| 6,5 | 8 | 41 | 7 | 25,5 | 256 |
| 7 | 8,5 | 42 | 7,5 | 26 | 256 |
| 7,5 | 9 | 42,5 | 8 | 26,4 | 264 |
| 8 | 9,5 | 43 | 8,5 | 26,8 | 264 |
| 8,5 | 10 | 44 | 9 | 27,2 | 272 |
| 9 | 10,5 | 44,5 | 9,5 | 27,7 | 272 |
| 9,5 | 11 | 45 | 10 | 28,1 | 280 |
| 10 | 11,5 | 45,5 | 10,5 | 28,5 | 280 |
| 10,5 | 12 | 46 | 11 | 28,9 | 288 |
| 11 | 12,5 | 47 | 11,5 | 29,4 | 288 |
| 11,5 | 13 | 47,5 | 12 | 29,8 | 300 |
| 12 | 13,5 | 48 | 12,5 | 30,2 | 300 |
GRAF – Assignment to t-blade system size
| Shoe sizes | t-blade system size | |||
|---|---|---|---|---|
| US | EU | UK | cm (foot length) | |
| 5,5 | 37 1/3 | 4,5 | 23,5 | 248 |
| 6 | 38 | 5 | 24 | 248 |
| 6,5 | 38 2/3 | 5,5 | 24,5 | 248 |
| 7 | 39 1/3 | 6 | 25 | 248 |
| 7,5 | 40 | 6,5 | 25,3 | 256 |
| 8 | 40 2/3 | 7 | 25,7 | 256 |
| 8,5 | 41 1/3 | 7,5 | 26 | 264 |
| 9 | 42 | 8 | 26,5 | 264 |
| 9,5 | 42 2/3 | 8,5 | 27 | 272 |
| 10 | 43 1/3 | 9 | 27,5 | 272 |
| 10,5 | 44 | 9,5 | 28 | 280 |
| 11 | 44 2/3 | 10 | 28,3 | 288 |
| 11,5 | 45 1/3 | 10,5 | 28,5 | 288 |
| 12 | 46 | 11 | 29 | 288 |
| 12,5 | 46 2/3 | 11,5 | 29,5 | 300 |
| 13 | 47 1/3 | 12 | 30,0 | 300 |
BAUER & CCM – Assignment to t-blade system size
GRAF – Assignment to t-blade system size
All color variations of the t-blade Stabilisatoren differ according to Screw connection (plastic or stainless steel) and color.
The article number will help you with quick identification and support.
Discover More
Stabilisator with stainless steel screw fitting, blue
36,99 € Couple
Stabilisator with stainless steel screw connection, yellow
36,99 €
Stabilisator with stainless steel screw connection, metallic blue
49,99 €
Stabilisator with stainless steel screw fittings, metallic chrome
50,00 €
Stabilisator with stainless steel screw connection, metallic ice blue
49,99 €
Stabilisator with stainless steel screw connection, metallic red
50,00 €
Stabilisator with stainless steel screw fittings, white
38,00 €
Reviews
Clear FiltersThere are no reviews yet.