Stabilisator with metallic gold plastic screw
49,99 €
The StabilisatorAvailable in 7 basic plastic colors as well as in
6 metallic colors (see product variants)
The screw stabilizers are made of fiberglass-reinforced plastic and
possess the identical material properties of the Holder. About it
Furthermore, they feature a variety of special light metals
screw components whose large pressing surfaces
Plastic-friendly, perfect and play-free Runner Mounting
enable.
The nut-Stabilisator is equipped with locking nuts which
They are securely anchored in the plastic via locking tabs.
is the screw-Stabilisator with the same number of
equipped with special screws that are secured by a locking washer
are protected against failure and have a tightening torque of
max. 1,2 Nm ensures a high degree of stability and safety.
Advantages:
Faster Runner-Change ++ Stable screw connection from
Runner and Holder ++ Stiffening of the skids transverse and longitudinal axes
about the Stabilisatoren-screw connection ++ Large-area, plastic plug-
Gentle light metal screw connections ++ Failure-proof
Screw components ++ Perfect, form-fitting Runner / Holder
Positioning via conical locking nuts ++ Extravagant visual
Design options through a wide range of colors ++
Illustrations are for illustrative purposes only – the Stabilisator With a system length of 248 mm, it has 4 stanchions and 5 screw holes; from a system length of 256 mm, it has 5 stanchions and 6 screw holes.
English
Characteristics
The stabilizer is made of glass fiber plastic and serves to fix the runner. It consists of a screw and nut side, which are connected by
means of a system key. The stabilizer is available in seven standard colors and 6 further metallic variants.
Advantages
-Quick & easy runner exchange
-Fail-proof screwing parts
-Stable connection between holder & runner
-Various design options
handling
Loosen all the screws of the stabilizer by means of the system key. Then, press with the key against the screws to remove the nut
side of the stabilizer. Take off both sides (nut and screw side) of the stabilizer. After having exchanged the runner, push the nut side
into the holder first. Then attach the screw side of the stabilizer and fasten the screws. Please note that for an easier mounting and
dismounting, the screw side of the stabilizer should always be on the inner shoe side.
Lindauer Str. 1a
86842 TürkheimResponsible person: support@t-blade.shopWarnings and safety information:
Warnings & Safety Information
T-Blade The products are sporting goods for use in ice hockey, figure skating and similar sports.
Ice sports. Use is entirely at your own risk.
-
Risk of injury: runners, Runner And interchangeable blades are sharp. In case of improper use
Handling poses a risk of cuts and injuries. -
Assembly & Replacement: The exchange of Runnern, stubbies or other system components
Installation must be carried out only according to the manufacturer's instructions. Improper installation can lead to material failure and loss of control.
or lead to injuries. -
Regular controll: Before each use, all fasteners, screws and system parts must be checked.
to check for secure fit, wear and damage. -
Wear parts: Runner and replaceable blades are subject to natural wear and tear and must be replaced when necessary.
Wear and tear should be replaced in a timely manner. -
Protective gear: Wearing appropriate protective equipment (e.g. helmet, pads) is strongly recommended.
empfohlen. -
Not for children without supervision: Use by children should only be under supervision and
Instructions will follow. -
Not a toy: T-Blade These products are not toys and are not intended for improper use.
Intended use.
The manufacturer and distributor accept no liability for damages or injuries caused by improper use.
These problems can arise from improper use, incorrect assembly, or lack of maintenance.
t-blade Holder-Size finder: Shoe size → t-blade system size
For ordering the t-blade Holders It's not the shoe model that's crucial, but the right one.
t-blade system size (HolderLength). Find your brand and size in the table and order the specified system size.
The information CM is just a check: it corresponds to the Foot length in centimeters.
Important: FARMER and CCM have here the identical Assignment. GRAF uses its own mapping.
BAUER & CCM – Assignment to t-blade system size
| Bauer / CCM Size | Shoe sizes | t-blade system size | |||
|---|---|---|---|---|---|
| US | EU | UK | cm (foot length) | ||
| 5 | 6 | 38,5 | 5,5 | 24,3 | 248 |
| 5,5 | 6,5 | 39 | 6 | 24,7 | 248 |
| 6 | 7,5 | 40,5 | 6,5 | 25,1 | 248 |
| 6,5 | 8 | 41 | 7 | 25,5 | 256 |
| 7 | 8,5 | 42 | 7,5 | 26 | 256 |
| 7,5 | 9 | 42,5 | 8 | 26,4 | 264 |
| 8 | 9,5 | 43 | 8,5 | 26,8 | 264 |
| 8,5 | 10 | 44 | 9 | 27,2 | 272 |
| 9 | 10,5 | 44,5 | 9,5 | 27,7 | 272 |
| 9,5 | 11 | 45 | 10 | 28,1 | 280 |
| 10 | 11,5 | 45,5 | 10,5 | 28,5 | 280 |
| 10,5 | 12 | 46 | 11 | 28,9 | 288 |
| 11 | 12,5 | 47 | 11,5 | 29,4 | 288 |
| 11,5 | 13 | 47,5 | 12 | 29,8 | 300 |
| 12 | 13,5 | 48 | 12,5 | 30,2 | 300 |
GRAF – Assignment to t-blade system size
| Shoe sizes | t-blade system size | |||
|---|---|---|---|---|
| US | EU | UK | cm (foot length) | |
| 5,5 | 37 1/3 | 4,5 | 23,5 | 248 |
| 6 | 38 | 5 | 24 | 248 |
| 6,5 | 38 2/3 | 5,5 | 24,5 | 248 |
| 7 | 39 1/3 | 6 | 25 | 248 |
| 7,5 | 40 | 6,5 | 25,3 | 256 |
| 8 | 40 2/3 | 7 | 25,7 | 256 |
| 8,5 | 41 1/3 | 7,5 | 26 | 264 |
| 9 | 42 | 8 | 26,5 | 264 |
| 9,5 | 42 2/3 | 8,5 | 27 | 272 |
| 10 | 43 1/3 | 9 | 27,5 | 272 |
| 10,5 | 44 | 9,5 | 28 | 280 |
| 11 | 44 2/3 | 10 | 28,3 | 288 |
| 11,5 | 45 1/3 | 10,5 | 28,5 | 288 |
| 12 | 46 | 11 | 29 | 288 |
| 12,5 | 46 2/3 | 11,5 | 29,5 | 300 |
| 13 | 47 1/3 | 12 | 30,0 | 300 |
BAUER & CCM – Assignment to t-blade system size
GRAF – Assignment to t-blade system size
All color variations of the t-blade Stabilisatoren differ according to Screw connection (plastic or stainless steel) and color.
The article number will help you with quick identification and support.
Discover More
Stabilisator with stainless steel screw connection, yellow
36,99 €
Stabilisator with stainless steel screw connection, metallic blue
49,99 €
Stabilisator with stainless steel screw fittings, metallic chrome
50,00 €
Stabilisator with stainless steel screw connection, metallic gold
49,99 €
Stabilisator with stainless steel screw fittings, white
38,00 €
Stabilisator with plastic screw connection, metallic chrome
49,99 €
Stabilisator with plastic screw fitting, metallic red
49,99 €
Stabilisator with black plastic screw fitting
34,99 €
Reviews
Clear FiltersThere are no reviews yet.