Stabilisator with plastic screw connection, metallic ice blue
t-blade Stabilisatoren – maximum stability, safe Runner-Fixation & individual appearance
The t-blade Stabilisatoren are a central functional element of the t-blade skid system.
They connect Holder and Runner over a high-precision metal screw connection and provide for one Play-free, extremely stable and form-fitting fixing.
Made of glass fiber reinforced plastic with identical material properties as the Holder, combine the Stabilisatoren low weight, high resistance to breakage and maximum rigidity – both in Both transverse and longitudinal directions the skid.
Material & Construction
- Base material: fiberglass reinforced high-tech plastic
- Screw connection: special lightweight metal screw fittings
- Pressing surfaces: large area, plastic-friendly
- Connection: No play, highly stable, form-fitting
The large pressing surfaces of the light metal parts enable a perfect power distribution and prevent material fatigue – even with frequent use Runner-Change.
Screw system (technical)
-
NutsStabilisator:
-
Locknuts with cone
-
Securely anchored in the plastic (locking tabs)
-
-
ScrewsStabilisator:
-
Special screws
-
Safety washers to prevent falling out
-
Maximum tightening torque: 1,2 Nm
-
Result: Maximum stability, safety and precision fit in daily use.
Advantages at a glance
- Faster Runner-change
- Extremely stable screw connection from Runner & Holder
- Stiffening of the skid in the transverse and longitudinal axes
- Large-area, plastic-friendly metal screw connection
- Fail-safe screw connections
- Precise positioning via conical locking nuts
- Long service life even with frequent changes
- Wide range of colors for individual looks
Colors & Variants
- 7 basic plastic colors
- 6 metallic colors
| Color | Metallic Ice Blue |
|---|---|
| system lengths | depending on the variant |
| Material | glass fiber reinforced plastic, light metal |
| Compatibility | t-blade skid system |
| Product type | Skid component / accessory |
Lindauer Str. 1a
86842 TürkheimResponsible person: support@t-blade.shopWarnings and safety information:
Warnings & Safety Information
T-Blade The products are sporting goods for use in ice hockey, figure skating and similar sports.
Ice sports. Use is entirely at your own risk.
- Risk of injury: runners, Runner And interchangeable blades are sharp. In case of improper use
Handling poses a risk of cuts and injuries. - Assembly & Replacement: The exchange of Runnern, stubbies or other system components
Installation must be carried out only according to the manufacturer's instructions. Improper installation can lead to material failure and loss of control.
or lead to injuries. - Regular controll: Before each use, all fasteners, screws and system parts must be checked.
to check for secure fit, wear and damage. - Wear parts: Runner and replaceable blades are subject to natural wear and tear and must be replaced when necessary.
Wear and tear should be replaced in a timely manner. - Protective gear: Wearing appropriate protective equipment (e.g. helmet, pads) is strongly recommended.
empfohlen. - Not for children without supervision: Use by children should only be under supervision and
Instructions will follow. - Not a toy: T-Blade These products are not toys and are not intended for improper use.
Intended use.
The manufacturer and distributor accept no liability for damages or injuries caused by improper use.
These problems can arise from improper use, incorrect assembly, or lack of maintenance.
t-blade Holder-Size finder: Shoe size → t-blade system size
For ordering the t-blade Holders It's not the shoe model that's crucial, but the right one.
t-blade system size (HolderLength). Find your brand and size in the table and order the specified system size.
The information CM is just a check: it corresponds to the Foot length in centimeters.
Important: FARMER and CCM have here the identical Assignment. GRAF uses its own mapping.
BAUER & CCM – Assignment to t-blade system size
| Bauer / CCM Size | Shoe sizes | t-blade system size | |||
|---|---|---|---|---|---|
| US | EU | UK | cm (foot length) | ||
| 5 | 6 | 38,5 | 5,5 | 24,3 | 248 |
| 5,5 | 6,5 | 39 | 6 | 24,7 | 248 |
| 6 | 7,5 | 40,5 | 6,5 | 25,1 | 248 |
| 6,5 | 8 | 41 | 7 | 25,5 | 256 |
| 7 | 8,5 | 42 | 7,5 | 26 | 256 |
| 7,5 | 9 | 42,5 | 8 | 26,4 | 264 |
| 8 | 9,5 | 43 | 8,5 | 26,8 | 264 |
| 8,5 | 10 | 44 | 9 | 27,2 | 272 |
| 9 | 10,5 | 44,5 | 9,5 | 27,7 | 272 |
| 9,5 | 11 | 45 | 10 | 28,1 | 280 |
| 10 | 11,5 | 45,5 | 10,5 | 28,5 | 280 |
| 10,5 | 12 | 46 | 11 | 28,9 | 288 |
| 11 | 12,5 | 47 | 11,5 | 29,4 | 288 |
| 11,5 | 13 | 47,5 | 12 | 29,8 | 300 |
| 12 | 13,5 | 48 | 12,5 | 30,2 | 300 |
GRAF – Assignment to t-blade system size
| Shoe sizes | t-blade system size | |||
|---|---|---|---|---|
| US | EU | UK | cm (foot length) | |
| 5,5 | 37 1/3 | 4,5 | 23,5 | 248 |
| 6 | 38 | 5 | 24 | 248 |
| 6,5 | 38 2/3 | 5,5 | 24,5 | 248 |
| 7 | 39 1/3 | 6 | 25 | 248 |
| 7,5 | 40 | 6,5 | 25,3 | 256 |
| 8 | 40 2/3 | 7 | 25,7 | 256 |
| 8,5 | 41 1/3 | 7,5 | 26 | 264 |
| 9 | 42 | 8 | 26,5 | 264 |
| 9,5 | 42 2/3 | 8,5 | 27 | 272 |
| 10 | 43 1/3 | 9 | 27,5 | 272 |
| 10,5 | 44 | 9,5 | 28 | 280 |
| 11 | 44 2/3 | 10 | 28,3 | 288 |
| 11,5 | 45 1/3 | 10,5 | 28,5 | 288 |
| 12 | 46 | 11 | 29 | 288 |
| 12,5 | 46 2/3 | 11,5 | 29,5 | 300 |
| 13 | 47 1/3 | 12 | 30,0 | 300 |
BAUER & CCM – Assignment to t-blade system size
GRAF – Assignment to t-blade system size
All color variations of the t-blade Stabilisatoren differ according to Screw connection (plastic or stainless steel) and color.
The article number will help you with quick identification and support.
Discover More
Stabilisator with plastic screw fitting, metallic blue
49,99 €
Stabilisator with plastic screw connection, metallic chrome
49,99 €
Stabilisator with metallic gold plastic screw
49,99 €
Stabilisator with plastic screw fitting, metallic red
49,99 €
Stabilisator with black plastic screw fitting
34,99 €
Reviews
Clear FiltersThere are no reviews yet.